Juice Filling Machine Solutions for PET Bottles, Glass Bottles and Cans

Ordering a Juice Filling Machine from Newpeak

Newpeak supplies filling and packaging solutions for water, juice, beer, oil, carbonated drinks and daily chemical products, and became a formal member of the China Beverage Machinery Association in 2020. A juice filling machine project starts with product and container details sent through the inquiry form or by sales email.

Payment is accepted by T/T, L/C or Alibaba Trade Assurance orders. The quotation covers the filler together with the equipment before and after it, so the offer describes a working line rather than a machine on its own.

Juice filling machine specifications

Juice Bottling Machine Options for Glass, PET and Cans

Bottling machines are specified around the container and its closure. Glass bottles mean heavier handling, washing upstream and careful capping. PET bottles are lighter and often blown on site. Cans run through seaming instead of capping, and downstream packing differs again.

Newpeak supplies juice equipment alongside water, beer, oil and carbonated drinks. Juice filling machine capacity options include 2,500, 3,500, 6,000, 7,000, 10,000, 15,000, 17,000, 20,000 and 24,000 BPH, and juice lines suited to cans and aluminum cans can fill up to 28,000 cans per hour.

Fruit juice differs from other beverages by product character: acidity, pulp and fiber, and hot fill versus cold fill with preservative. The same bottling platform is configured differently for fruit juice, and the discussion starts from product and container samples.

Juice Filling Equipment in a Complete Setup

A juice filling machine sits at the centre of a setup, but the filler alone is never the whole project. Equipment around it includes water treatment where relevant, blending or mixing, pasteurization, bottle rinsing, filling, capping, labeling or coding, and packing.

Newpeak pasteurization machines are offered in capacities of 0.5–20 t/h, 1–20 t/h, 1–30 t/h, 30–500 L/h and 500–10,000 L/h, depending on model. Those figures describe the pasteurizer only, not the filler or the line.

Juice Filling Line Capacity and Configuration

Newpeak juice filling line capacity options include 2,500, 3,500, 6,000, 7,000, 10,000, 15,000, 17,000, 20,000 and 24,000 BPH. Layout depends on container, product and pasteurization: a glass line carries washing and cooling, a can line carries seaming, a hot-fill line carries heat treatment.

Standard machines are usually delivered within 25–35 days, while customized turnkey production lines take 45–60 days depending on configuration. Heat treatment of the juice before filling belongs to the pre-processing system; tunnel pasteurization acts on sealed bottles or cans after filling, and the stages are separate.

Fruit Juice Filling Machine: Hot Fill and Pulp Handling

Pulp and fiber need gentle agitation in the product tank or filling valves sized for particulates, so the product stays suspended and the dose stays even. Hot-fill products need heat-tolerant machine components and a matching pasteurization step ahead of the filler.

Upstream heat treatment before filling is handled by the pre-processing system. Tunnel pasteurization of sealed bottles or cans happens after filling and acts on the closed pack. Keeping the stages apart in the specification avoids attaching heat duty to the wrong machine.

Juice Bottle Filling Machine: Bottle Sizes and Changeover

A juice bottle filling machine is built around bottle diameter, height and neck finish. Running several bottle sizes on the same machine requires changeover parts, such as neck guides, star wheels and filling valve height settings, plus changeover time. It is specified from actual bottle samples.

Capacity is quoted from the stated juice options, and can filling is quoted as a separate case because seaming replaces capping. Physical bottle samples or drawings, sent with caps, shorten the specification step and settle the neck finish.

Juice Filling and Capping Machine: Closures and Monobloc Design

In a monobloc, rinsing, filling and capping stations sit on a single frame and share a drive and conveyor. Bottles pass between stations on the machine’s own star wheels, which reduces handling and floor space.

Caps fall into families such as screw caps, sports caps and press-on caps. Each family drives a different capping head, and heads are configured from the buyer’s bottle and cap samples. Samples can be sent with the inquiry so the quotation matches the real pack.

Automatic Juice Filling Machine: Automation and Delivery

An automatic juice filling machine runs from a PLC-based control system. Rinsing, filling and capping are sequenced automatically, bottles move on a conveyor, and reject or inspection stations take faulty packs off the line. The operator still loads caps, supplies product and sets changeovers.

Newpeak’s team includes 10 R&D engineers and 3 QA/QC inspectors, and the manufacturing plant covers 4,259 m². Standard machines are usually delivered within 25–35 days; customized turnkey lines take 45–60 days depending on configuration. Payment is by T/T, L/C or Alibaba Trade Assurance.