Carbonated Beverage Filling Machine Solutions for Soda and CSD Lines

Carbonated Beverage Filling Machine Range and Model Selection

A carbonated beverage filling machine fills CO2 drinks under equal pressure, also called isobaric filling, so the bottle and the product bowl stay at the same pressure and the drink keeps its gas. Newpeak offers the DCGF series 3-in-1 carbonated drink filling machine and complete carbonated beverage production lines for soda, soft drinks, sparkling water, energy drinks and beer. Model sizes are shown in the table below.

Capacity runs from 2,000–36,000 BPH. For 500 ml bottles the range is offered in the discrete step options listed here, and a 6L bottle line tailored for a plant in Russia fills 14,000 bottles per hour. Send your bottle size, target output and drink type, and Newpeak prepares a configuration proposal for your line.

• 2000-3000 BPH
• 3000-4000 BPH
• 4000-5000 BPH
• 8000-9000 BPH
• 11000-12000 BPH
• 13000-15000 BPH

Carbonated drink filling machine specifications

CSD, Soda and Carbonated Filling and Capping Machines

CSD means carbonated soft drinks. On a CSD filling machine the bottle is pressurised before the valve opens and product enters against counter-pressure, which reduces CO2 loss and foaming at the filler. Newpeak supplies the DCGF 3-in-1 carbonated drink filling machine and carbonated beverage production line; send bottle size, cap type and target output to start a specification.

Soda filling machine capacity should match bottle size, target BPH and the space your line layout allows, because filler heads, capper and conveyor lengths scale together. Within the Newpeak carbonated beverage filling machine range, capacity is 2,000–36,000 BPH, and 500 ml options run from 2,000–3,000 BPH up to 13,000–15,000 BPH. Give your bottle size and required output to receive a quotation.

A carbonated filling machine limits foam and CO2 loss by filling under equal pressure: the bottle is pressurised to the same level as the product bowl, filled, then released in stages. The Newpeak carbonated beverage filling machine uses equal-pressure filling for carbonated drinks, soft drinks, sparkling water, energy drinks and beer, with capacity from 2,000–36,000 BPH.

A soda filling and capping machine combines both steps in a 3-in-1 monoblock, so the cap goes on soon after isobaric filling while the bottle still holds its pressure. The Newpeak DCGF 3-in-1 carbonated drink filling machine and carbonated beverage production line can be configured this way, alongside the wider monoblock filling machines range. Capping depends on cap type and bottle finish, so share both when you inquire.

Soda Bottling Machines and Equipment

A soda bottling machine line runs as a complete automated process for soda, soft drinks, sparkling water and beer. Bottles are handled and rinsed, filled under isobaric conditions, capped, labeled and packed. Newpeak offers a carbonated beverage production line and turnkey configuration, and the wider beverage filling lines range covers rinse-fill-cap equipment for other drinks.

• Carbonated beverage mixer: blends syrup, water and CO2 ahead of the filler
• Isobaric filler: the filling stage itself, sized to bottle and output
• Capper: applies the closure directly after filling
• Labeler: applies body or wrap labels to the filled bottle
• Packing equipment: cartons, trays or shrink film for dispatch

Which equipment a soda bottling plant needs beyond the filler depends on bottle type, output and plant layout; a high-speed mixer suits a large soda plant, while a compact line may use a smaller mixing and buffer arrangement. Newpeak offers a carbonated beverage mixer and carbonated beverage production line, and covers can filling machines where cans are part of the plan.

Delivery, Payment and Service Support for Carbonated Lines

Standard Newpeak filling machines are usually delivered within 25–35 days; customised turnkey production lines take 45–60 days depending on configuration. Payment is accepted by T/T, L/C or Alibaba Trade Assurance orders. Newpeak has over 16 years of filling equipment manufacturing experience and a plant of 4,259 m² in Zhangjiagang.

The beverage filling machine service center provides installation, maintenance, troubleshooting, spare parts and technical support, and Newpeak provides global service for water, juice, carbonated drink and oil filling lines. Send your bottle and drink details through the contact page to open a line inquiry.